Introduction:
The machine consists of motor seat, pressing frame, electromagnetic clutch transmission, electrical control components. Motor is located in the back right side of the machine, through the V-belt reduction drive. Drag the flywheel running. Electromagnetic clutch flywheel and shaft coupling. Pull through the electromagnetic clutch, disengaging operation or braking operation of the control shaft. After the operation of the drive shaft, through a reduction gear speed reduction system, the crank shaft at both ends of the wheel rotational speed, so affecting the connecting rod drives the reciprocating rocking motion swing frame completely Creasing task. Paper features a three-step jump, Story or aluminum foil can be reversed, computer-controlled heat evenly.
Specification:
| No. | Item | Parameters |
| 1 | Effective hot foil stamping size | 930x670mm |
| 2 | Cutting type | I. Continues cuttingII. Continues open delay cutting |
| 3 | Continues cutting speed | 23±1pcs/min |
| 4 | Heat area | 2 |
| 5 | Panel space adjust | 12mm |
| 6 | Foil area | 3 |
| 7 | Heat control | computer |
| 8 | Motor power/Total Power | 4.0kw/～10kw |
| 9 | Machine weight | 3100kg |
| 10 | Overall size | 1850*1650*2150mm(L*W*H) |
